How to change battery in VW ID 4 key fob?
Whether you’re enjoying drives around Tysons Corner in the sleek new Volkswagen ID.4 or cruising comfortably in your trusty Volkswagen Taos, your vehicle is packed with conveniences and luxuries. One such convenience is the VW key fob. It allows you to start your daily commute effortlessly. But a dead key fob battery? It can quickly disrupt your routine. Don’t worry—we’ve got you covered. We’ve put together a quick and simple guide on how to change battery in VW ID 4 key fob with ease.
How to Open a VW Key Fob?
Materials Needed:
- New CR2032 battery
- Small screwdriver
- Tape
To avoid scratching or damaging your key fob, wrap the head of the screwdriver with tape. This will help dull the harsh edges. Now, let’s dive into the steps:
Eject the Emergency Key: Start by pressing the button on your VW key fob to eject the emergency key.
Locate the Seam: Find the seam between the base and the lid of the key fob. Get a firm grip on it.
Create a Space: Carefully create a space between the two pieces, then use your screwdriver to pry them apart gently.
Replace the Battery: Take out the old battery and replace it with the new CR2032 battery. Ensure the positive side is facing upward.
Reassemble the Key Fob: Snap the key fob case back together, making sure everything fits as snugly as before.
And that’s it! With these simple steps, your key fob should be as good as new, and you’ll be back on the road in no time.
How to Start Your VW with a Dead Key Fob?
If your VW key fob dies while you’re exploring Alexandria, don’t worry—you can still unlock your door manually with your key. The procedure might vary depending on your vehicle model, so here’s a general guide on how to open your vehicle if the key fob is dead. Be sure to consult your owner’s manual for detailed instructions specific to your model:
Find the Emergency Key: Most VW key fobs feature a hidden emergency key. Look for a small release button that will allow you to slide out this key.
Unlock the Door: Insert the emergency key into the driver’s side door lock and turn it to unlock the door.
By following these simple steps, you’ll be able to access your vehicle even with a dead key fob. For precise instructions tailored to your specific model, always refer to your owner’s manual.
Models with Tab Covers
Some VW models are equipped with a protective cap covering the door’s lock cylinder. This cap has a notch designed to be pried off to expose the lock cylinder. If your model features this design, follow these steps to access your vehicle:
Insert the Key: Position the key into the notch located beneath the cap on the driver’s side.
Remove the Cap: Gently pull off the cap tab with your free hand.
Unlock the Door: Insert the key into the now-exposed lock cylinder and turn it to unlock the door.
VW CC & VW Touareg Models
In models such as the VW CC and VW Touareg, you won’t find a traditional bayonet key for unlocking the door. Instead, these vehicles come with a concealed plastic emergency key inside the fob. Here’s how to utilize it:
Retrieve the Emergency Key: Press the button on the side of the fob and pull out the keyring loop at the top to extract the emergency key.
Unlock the Door: Use this emergency key to unlock the door. Note that this key won’t start the vehicle.
Start the Vehicle: Place the key fob into the ignition slot to start the engine.
Note: For other Volkswagen models with keyless access, if the fob battery is low and the push-button start is unresponsive, hold the fob against the steering column while pressing the start button. This should enable you to start the vehicle.
